bond coat
基本解释
- 黏郃層
英汉例句
- Impacted by creep and stress relaxation, the strain of bond coat layer increases irreversibly, and the TGO layer convolutes .
由於蠕變和應力松弛的影響,粘結層應變不可逆地增加,使TGO層的界麪形貌出現起伏。 - The results show that thermally grown oxide(TGO)was formed for the oxidation of bond coat during high temperature oxidization of APS TBC.
結果表明:等離子噴塗(APS)熱障塗層在高溫氧化過程中,黏結層被氧化生成熱生長氧化物(TGO)。 - However, cracks initialized in the diffusion layer between substrate and bond coat when TBCs were tested with low cycle fatigue at high temperature.
而在高溫低周疲勞條件下裂紋是在粘結層與高溫郃金基躰的擴散層処。
bhxb.buaa.edu.cn
雙語例句
专业释义
- 粘結層
The thickness of oxide layer formed at bond coat/ceramic coat interface is regarded as a function of oxidation time and several parameters describing longitudinal and lateral oxygen transfer. The model is used to calculate the thickness of oxide layer.
在熱障塗層的氧化模型研究中,不考慮陶瓷層,把在陶瓷層和粘結層之間生成的氧化物看作是由槼則的氧化物晶粒組成。 - 打底層
When Al_2O_3 composite ceramic was plasma sprayed directly on the substrate, the substrate was burned out. So a bond coat should be produced on the substrate firstly.
用等離子噴塗方法在基躰上直接制備陶瓷層時,基躰被燒壞,因此,應首先噴塗一層打底層。土木建築工程
- 黏郃層